Best Temp And Humidity For Germinating Weed Seeds


Buy Cannabis Seeds Online

Discover more on how to control your grow room’s environment and how grow lights play a role in the ideal temperature for growing weed. So what is the best temperature for growing weed and what about the humidity in your grow room? Check it out! Temperatures and Medical Cannabis Growing: From Seedling to Harvest The marijuana industry created an estimated $34 billion economic impact in 2018. Legal sales of marijuana are expected to

The Best Temperature for Growing Weed

Growing marijuana isn’t simply putting some seeds in the soil and watching them grow. Weed needs nutrients, water, proper growing material, good pH levels, ventilation, pruning, light, and space, just to name a few. So, does the temperature for growing weed matter?

Yes! One of the most important aspects of growing cannabis is the temperature of the indoor or outdoor garden. Weed likes a specific climate to create a reasonable yield without problems.

Continue reading to find out everything you need to know to create the perfect climate for your marijuana plants.

Why marijuana growing temperature matters

Temperature for growing weed matters because it’s linked to the health of your cannabis plants. When the environment isn’t quite right, the marijuana crop will have a small yield or be more prone to diseases.

Some hybrids are fragile and can’t take any extreme temperature changes without dying. Other cannabis strains are heat resistant or more stable. Even then, their maximum yield can be lower if not cultivated in the correct climate.

The best temperature for growing weed at different stages

The temp for growing weed should be between 65 to 85 degrees Fahrenheit, and marijuana crops prefer specific climates during the different growth stages.


At the seedling stage, marijuana likes it hot and humid. The best temp for growing weed indoors or outdoors is 70 to 85 degrees Fahrenheit with a 75 to 85% humidity level.

During this time, the cannabis seeds are growing roots and need to absorb extra moisture because of the rapid growth. Make sure the humidity level never goes over 90%, as this will welcome mold, mildew, and other pathogens.


The next phase of the weed growing cycle is the vegetative stage. The marijuana growing temperature needs to drop a little to 70 to 78 degrees Fahrenheit during the day. At night, it never should drop more than 10 to 15 degrees.

In the vegetative stage, you’ll start to reduce the humidity by 5% every week until you get to the range of 45 to 55%. By doing this, you’re preventing the risk of bud rot or damping-off.


The flowering stage is the last part of the marijuana plant’s life. During this time, you should reduce the cannabis temperature again to 68 to 75 degrees Fahrenheit. Keep an eye on CO2 levels, as this can increase the heat throughout the day.

You’ll need to lower the humidity level an additional 5% each week until it’s at 35 to 45%. During the last two weeks of growth, the moisture needs to be about 30%. Monitoring the humidity level will keep powdery mildew or other pathogens at bay.

How to control marijuana growing temperature

We’ve gone over the numbers, and now it’s time to tell you how you can achieve the best temperature for marijuana growing.

You can control indoor cultivating spaces easier because there are fewer elements you have to deal with. If you have central heating, you can use this to regulate the temperature. When this isn’t an option, you can buy a space heater. Remember, lights put off extra heat.

With artificial heating, it tends to create a dry environment. Make sure you have a humidifier in indoor gardens. Also, you’ll need some grow tent ventilation within the space to help reduce the temperature or humidity when required. This will also help with how to get rid of weed smell that lingers.

You’ll have to deal with natural sunlight, wind, rain, clouds, and changing temperature from day to night with outdoor gardens. To regulate the heat within the greenhouse, you can purchase an outdoor space heater.

Keep the humidity levels in check with a humidifier or by having buckets of water around so that the moisture will naturally be in the air. Use a ventilation system to help regulate the heat on hot and humid days.

With an indoor or outdoor growing space, you’ll need a high-quality thermometer and humidity checker.

Correcting temperature for growing weed

If there’s an issue with the climate in your marijuana growing area, you’ll need to fix it before any damage happens to your weed plants.

Temperature too low

When the climate is too cold, it stunts the growth of your cannabis plant, and your yield will be low. If the temperatures drop below freezing, your crops might die.

If you notice the temp dropping, slowly increase it by turning on your heating system. Then, look for the cause. Maybe there’s a crack in a window or a problem with the ventilation.

Temperature too high

Marijuana likes the heat, but too much of a good thing can damage the plant. Pathogens are quick to attack vulnerable weed crops.

Along with that, an excess of heat can hinder the harvest’s ability to perform photosynthesis, which harms the marijuana plant’s growth. Signs of cannabis heat stress are drooping, cupping, or yellowing leaves.

Temperature and humidity

Temperature and cannabis humidity levels are linked because the warmer the air, the more moisture it can hold and vice versa. This is important because you need the correct percentage to be balanced to produce a quality marijuana plant.

See also  Cannabis Seed Bank Paypal

This table will give you an idea of what to expect at certain temperatures.

Stage Temperature Humidity
Seedling 70 to 85°F 75 to 85%
Early Vegetative 70 to 80°F 60 to 80%
Late Vegetative 70 to 80°F 45 to 55%
Early Flowering 65 to 80°F 35 to 45%
Late Flowering 65 to 80°F 30 to 35%

Temperature and choosing the best grow lights

All lights give off a certain amount of heat. When you’re growing indoors, this is a factor you’ll need to consider.

You don’t want grow lights that give off too much heat because the leaves closest will be at a higher temperature than the rest. Try to look for lamps that don’t change the environment too much.

Ideally, you want the temperature to be consistent in all parts of the room.

Final thoughts on the ideal temperature for growing marijuana

When you’re a weed grower, you have to keep in mind many factors. One of the most influential aspects is the temperature of the growing space.

When the temp is perfect during the different stages, your cannabis crop will yield the proper amount and be less prone to diseases.

Now that you know all this information check the temperature and humidity levels in your garden. If you haven’t started planting yet, buy some cannabis seeds and use these tips on your way to becoming a successful marijuana grower.

Visit our shop to get the best deals in marijuana seeds! We offer the best genetics and a germination guarantee, so why look anywhere else for your favorite strains?

About the author: Derek LaRose

Also known as Kronic from The Cannabis Kronicles, Derek LaRose is a young ambitious cultivator and a staple educator for indoor cultivation.

Best Temperature and Humidity for Growing Weed

Getting the temperature right for your cannabis plants is an essential part of each stage of the growing process. If the temperature in your grow room or outdoors is too hot or too cold, your young weed plants will not be able to photosynthesise properly, and this will inevitably affect their growth and development. However, it is not as simple as saying ‘this is the correct temperature; the temperature needs of the plants vary according to their stage of development, so you must have some knowledge of their requirements. To help you, we have written this guide which will explain the best temperature and humidity for growing weed for each phase of your young weed plants.

Now, we understand that establishing the ideal temperature for weed plants can be tricky – some say that it is as much instinct as it is science. However, it is certainly possible to work things out for the growing conditions of your plants, and this article will tell you everything you need to know.

What you need to know about temperature and humidity

The first thing you need to understand is the close relationship between temperature and humidity levels. Let’s look at science. Humidity refers to the amount of water vapour present in the air. At higher temperatures, molecules move at top speeds; thus the probability of condensation of water vapour due to the collision of molecules is less. This makes the air hold more water vapour at high temperatures. In other words, as the temperature increases, the humidity of air also increases.

Most plants including cannabis plants, need humid air to thrive. This is because the pores through which they breathe lose most of their moisture when the surrounding air is dry, a loss that the plant can’t always replace through the water absorbed by its roots. The thinner the leaf – and cannabis plants have quite small, narrow leaves, the higher its need for humidity.

When deciding the correct temperature for your plants, therefore, it is also sensible to assess the humidity levels as the two go hand-in-hand. To do this, you should invest in a good-quality thermometer and a hygrometer, ideally digital models with the ability to store historical maximum and minimum levels.

When the temperature is 68°F (20°C), air can absorb 7.2 ml of water maximum. When this occurs, the air has a relative humidity of 100 percent. There will be so much water vapour that the air will be as dense as a cloud and will affect your ability to see anything. Air with a temperature of 32°F (0°C) is only able to absorb about 5 ml of water. This is the reason why the air is a lot drier in the winter than in the summer.

Temperature and humidity for the germination phase

The first moments of your cannabis plant’s life are crucial. Germinating seeds indoors will allow you to have more control over the temperature, but it is also possible to do so outdoors if the climate conditions allow. Having a high temperature (from 22 to 26°C) is an important factor for your seeds to decide to emerge into the world.

However, the temperature must not fall to less than 20 degrees Celsius nor rise to more than 30. If you are using a greenhouse for the germination phase, be warned that it can get sweltering so you must regularly monitor the temperature. Humidity must also be continuously monitored. If the seed trays dry up, germination will not take place or recently sprouted shoots will wither and die. You must not forget to add water when necessary – a spray dispenser is gentle for this, but you should not give them too much water. The seeds should only be soaking wet during the first two days.

See also  Mango Seed Weed

Once the first seedlings emerge with two cotyledons (the first two round leaves that develop), they should be carefully transplanted. If the seeds are autoflowering, you should transplant them to a large pot. If they are feminised seeds, however, you can transplant them to a smaller container and move them to the large bowl when they are a bit more established.

Best temperatures and humidity for the seedling phase

The optimal conditions for cannabis seedlings are a sunny, warm (20-25ºC) and humid environment with well-circulated air. Their underdeveloped root systems mean that seedlings need to be exposed to lots of light and heat. Problems arise as their immaturity means that they cannot withstand high temperatures. Therefore, we recommend that growers maintain 20ºC to 25ºC indoor environments when the lights are on.

Humidity levels also need to be high. Levels between 65 percent and 70 percent are sufficient for seedlings to absorb enough water through their leaves.

Optimal temperatures for the vegetative phase

You can start to relax a bit during the vegetative phase. As cannabis plants mature, they grow stronger and better able to cope with extremes of heat. They start to be more resistant to heat and cold. You can raise the temperature to as much as 30ºC.

As the roots have sufficiently developed to absorb plenty of water, you may wish to reduce humidity levels by 5 percent each week. The relative humidity should ideally fall between 40 percent and 70 percent.

The best humidity and temperatures for the flowering phase

The last phase of the cannabis growth cycle is the flowering phase. Growers should aim to maintain warm temperatures that are pretty much the same as when the plants were at the seedling stage. Ensure that the temperature stays at a nice warm 20ºC to 25C to prevent buds from burning their terpenes. This will allow your plants to produce deliciously potent flowers.

It is also a good idea to lower humidity levels to about 40 percent to 50 percent, especially during the late flowering phase. This encourages the production of highly-prized resin and a higher terpene content leading to a more aromatic and flavourful crop.

Cultivators should be advised that typical temperature variance when the lights are switched off is 5ºC, and this applies to all the phases of development.

Temperatures that are too cold

Temperatures that are too cold will slow down a cannabis plant’s metabolism and its roots system will become increasingly ineffective. If temperatures drop below 12 degrees, the plant is even at risk of death.

The obvious solution to boosting the temperature of the grow room is to get an electric heater and plug it in. This has several disadvantages, however, mainly due to its high consumption of electricity but also because of its drying nature which can affect levels of humidity, and the direct distribution of the heat which makes it hard for all the plants to enjoy the uneven heat. An oil-filled portable radiator is another option if you can get one which isn’t too large to fit into the grow space. We recommend small tubular electric heaters which can be placed conveniently on the floor and only use a few watts of electricity. Radiating cables for indoor use are another excellent alternative, especially if you need to heat trays of seedlings.

Temperatures that are too hot

Reducing heat levels in a grow tent can be much harder to control than the reverse. We recommend using electric fans to circulate the air as much as possible to disperse the heat and thus cool the young cannabis plants.

Placing an exhaust fan in the ceiling vent of your grow tent is also highly effective at reducing heat. After all, heat always rises to the top.

You could also use a cooling humidifier which reduces temperatures while boosting humidity levels. Just take care that the humidity does not increase too much for the growth phase. Remember, seedlings need higher levels of humidity than vegetative marijuana plants, for which 40 percent is optimal.

Temperatures and Medical Cannabis Growing: From Seedling to Harvest

The marijuana industry created an estimated $34 billion economic impact in 2018. Legal sales of marijuana are expected to increase from $10 billion in 2018 to $20 billion by 2022, according to the Marijuana Business Fact Book. This means that more and more legal growers (under strict governmental regulations) will be on the American horizon seeking the best indoor growing practices. Temperature and humidity monitoring are essential for growing healthy cannabis plants throughout the entire life of the plant…seedling to harvest.

What’s the Difference Between Temperatures and Humidity Levels?

Temperature and humidity levels interact and are very similar and are closely related to one another. Humidity is the measure of how much humidity is actually being held in the air. Relative humidity (RH) which is one way to measure humidity levels, is how much water is in the air compared to the maximum amount of water that can be held in the air at that temperature. The premise is that warm air holds more water vapor than cold air so it is important to get the warmest air in the environment. It is necessary to extract the warmest air from the growing environment while allowing cool air to enter. The warm air alone has way too much vapor for ideal growing conditions.

See also  Joe Pye Weed Seeds

Horticulturalists know that the key to success in any growing plant is understanding the lifecycle of the plant. This is also true with growing cannabis. Throughout every stage of growth, cannabis plants will have a constant need for water which the amounts will fluctuate with the humidity. When the humidity is high, plants use their leaves to absorb moisture from the air which results in less water drawn from their roots. On the other hand, when the humidity is low, cannabis plants will take more water through their roots.

Monitoring and having the right humidity encourages strong, healthy, nutrient-dense leafy plants with optimal growth.

Humidity levels must be monitored to prevent:

1. Bud Mold/Rot: A condition when the inside of the plant is taken over by mold. When this happens the buds are unusable.

2. White Powder Mildew: White Powder Mildew (WPM) is a rapidly reproducing fungal disease resulting in a white powder or mildew covering the plant. If caught early enough, it can be prevented, if not the plant will become unusable.

3. Nutrient Problems: If a cannabis plant takes in too many nutrients at once the leaves will turn yellow and the tips will look burnt, called nutrient burn or nute burn.

4. Slowed Growth: If humidity levels are not optimal for the growth stage, they don’t grow as fast as they could. Younger cannabis plants grow better in higher humidity than more mature plants.

So, the next question is how do you measure the ideal levels?

Cannabis Temperature Monitoring In All Stages of Growth

There are four stages or periods of cannabis growing, all requiring different temperature and humidity levels. They are seedling, vegetation, flowering, and late flowering. Experts recommend monitoring levels throughout all four stages using a digital thermometer and a digital hygrometer that include a memory feature so history can be reviewed. The four stages and what they require are:

1. Seedling Stage: Seedlings or clones, little cut-off pieces from a parent plant that needs to develop roots, require high humidity levels between 65 and 70 percent. These high humidity levels are needed because the root system is not established and humidity allows water intake through the plants’ leaves. Young growing cannabis plants prefer temperatures between 75 and 80 degrees Fahrenheit. Anything above 80 degrees Fahrenheit is not recommended.

2. Vegetation Period: This is the stage that cannabis starts developing its renowned leaf shape. It is important to note that light exposure is a very important part of this stage. The number of humidity levels should be lowered by five percent each week throughout the vegetation period. The temperature can be increased, too because roots absorb more water and evaporate through the plants’ leaves. Humidity levels should be before 40 and 70 percent. If wet spots are forming on the leaves, humidity levels are too high.

3. Flowering Plants: The humidity levels of cannabis plants at the beginning of the flowering stage should be lowered to 40 to 50 percent. At this stage, the plants have created a robust root system to meet their water needs. They still absorb water through the leaves. A lower humidity level is required to prevent mold and mildew from forming. Note that mold and mildew infect the plant from the inside the buds, so it isn’t visible at first.

4. Late Flowering Period: This period lasts anywhere between six and 12 weeks and when plants mature. During this time careful temperature and humidity monitoring are necessary. It is recommended that humidity levels be lowered between 30 and 40 percent to improve the yield, flavor, and appearance of the plant. Temperatures can range between 70 and 80 degrees Fahrenheit.

Tips To Adjust Temperature and Humidity for Cannabis Growing

It can be difficult to keep humidity and temperature levels at the right balance throughout the plants’ life cycle. Keep in mind that warm air retains more water than cold air and that relative humidity and temperature interact to create the perfect balance. The following are hands-on tips for adjusting these levels but note that there is technology available in the SaaS Cloud that will wirelessly do the work for you.

Tips to Lower Humidity and Temperature:

  1. Increase fresh, cool air in the growing area
  2. Water plants right when lights are turned on in the growing area
  3. Add a dehumidifier to regulate humidity in the growing area

Tips to Increase Humidity and Temperature

  1. Keep the soil surface moist
  2. Surround the room with moist towels and open containers of water
  3. Use a humidifier to constantly add moisture to the room

It is difficult to be present for the entire life cycle of a cannabis plant. There are more innovative and technological methods for monitoring temperature and humidity levels. Contact SensoScientific for a free trial and to learn more about the most advanced wireless monitoring solution available for cannabis temperature monitoring.

How useful was this post?

Click on a star to rate it!

Average rating 5 / 5. Vote count: 1

No votes so far! Be the first to rate this post.